Safety goggles are always recommended for all cutting and nailing operations.
As on any construction job, use proper safety protective equipment and follow
safe construction practices. 
With a circular saw, install the fine-toothed blade backwards on the saw for
a smoother, cleaner cut (especially in cold weather). Cut slowly. Do not attempt
to cut materials other than vinyl with a reversed direction saw blade. 
With tin snips, avoid closing the blades completely at the end of a stroke for
a neater, cleaner cut. 
With a utility knife or scoring tool, score the vinyl from the face side with
medium pressure, and snap it in two. It is not necessary to cut through
the vinyl with a knife. [Prev] [Top] [Next]
|
||||||||||||||||||||||||||
Copyright © 1998-2007 Home Remodeling Technology, Inc. All Rights Reserved